КУРС ЦБ $ USD 92,5919 EUR 100,2704
00:00:00  00.00.0000
Москва 0 , 0м/с
CLAAS: THE EXPERTS EXPERIENCED TRACTOR AXION 950 AND XERION 4000 WHEN COMPACTING CORN SILAGE
CLAAS conjunction with the Consulting center of renewable energies and the School of agricultural technology Education center Triesdorf (Germany) has tested a tractor AXION 950 and XERION 4000 when compacting corn silage. Testing of heavy vehicles was carried out at the biogas plant in North Rhine-Westphalia. The volume of harvested silage was allowed to test vehicles in a fully comparable conditions on the same boot volume of the silos. Moreover, to achieve the most identical conditions for the work carried out by the same operator on each tractor in turn.
Подписаться на новости

Prior to testing, were tested and recorded specifications of the two tractors, in particular, special attention was paid to so important for the tamping parameters, like the total machine weight, tire pressure and contact patch and weight distribution. Along with the blade for leveling the silo 2.6 t total mass of the tractor XERION 4000 amounted to 22 tons, with 56% of the weight I had on the front and 44% rear. 18.1 tons total weight of a tractor AXION 950 (including 3 t blade) were distributed in favor of the rear axle, which accounted for 64% of the weight of the machine. To determine the size of the contact patch, the tires were dusted. At XERION 4000 area of contact with the ground was 2.2 m2, and AXION 950 – 2.5 m2 with a smaller radius of the front wheels.

According to the experts ' recommendations for high-quality packing and to prevent heating laid in a trench of mass, for every 50 tons of silage should have 10 to 12 t weight of the roller. These indicators are particularly important in laying the upper layers because lower further compacted under its own weight. It is also necessary to consider that the land being siloed mass, the harder it is to condense. At the experimental site moisture content was about 40% due to dry weather, which was an additional challenge for the tested equipment and machine operators. Each machine was given a strictly limited time – one hour for the stack 100 tons of corn silage in a separate pit.

Upon completion, CLAAS experts and specialists of the Center using a probe measured the density of the upper layers of the silo. This figure was calculated based on the weight of the sample and the volume of the tube of the probe. The best seal showed the XERION 4000 – 307 kg/m3, which is fully consistent with the normative values with humidity being siloed mass of 44.1%. The tractor AXION 950, working on the silo, where the humidity was a little lower by 41.6%, the density was 274 kg/m3. The latter also went beyond the norm.

 

In General, the results of the test, the experts recommended that the XERION 4000 large farms that can use it not only when compacting, but also on other agricultural and special works, for example, for wood chopping, mulching, snegovichki. Tractor AXION 950, as noted by German experts, is focused on households who need a machine for a wide range of tillage and transport work.



Translated by service "Yandex.Translation"
Источники: Agro2b
Wednesday, 27 March 2024
Tuesday, 26 March 2024
Friday, 22 March 2024
Thursday, 21 March 2024
Wednesday, 20 March 2024
Tuesday, 19 March 2024
Monday, 18 March 2024
Thursday, 14 March 2024
Wednesday, 13 March 2024
Tuesday, 12 March 2024
Monday, 11 March 2024
Thursday, 07 March 2024
Wednesday, 06 March 2024
All news