This model is the most popular on the market.
The performance of the dryer Mecmar D 20/153 T HP
Product Corn
Air temperature (°C)120
Capacity**** (m3) 27
Capacity (t)19.5
Evaporation capacity** (%/h)4.5
The initial moisture content (%) 25
Final humidity (%) 14
Hourly production*** (t/h) 4.8
Daily productivity ***(t/24h)115.2
MECMAR dryers are the difference is:
- Fuel consumption reduction of 1% moisture (dryer MECMAR consume 1 liter of fuel).
- The longer the combustion chamber (allows the flame to give maximum power, with no contact with the dried product, which is important for drying direct heating.
- Gear transmission on the auger and agitator in contrast to belt drives can withstand the maximum load and serves for many years.
Double - sided unloading (except Mecmar CPT 7) will allow to unload the product in any of the sides or on two sides simultaneously.
- The presence of a set of radar protection of the heating chamber (prevents drying of the product in the heating chamber).
- The presence of a Central screw with a double winding and variable pitch (provides long lasting, traumatic for the product)
Options:
- Possibility of installation of aspiration system (optional, allows you to remove light impurities from the drying of the product during drying).
- Possibility of installation of the roof to protect from rain (optional, protects from influence of an atmospheric precipitation, thus increasing the efficiency of the aspiration system).
- Ability to set real-time control system (optional, follows the mechanism of agitators and in case of an emergency stop turns off the burner and takes a light signal of an emergency stop via the tracker, in the geared power transmission is a necessity in this option minimized, but can be installed as an additional system security).
- Possibility of installation of an automatic lubrication system (optional, provides in automatic mode, the flow of grease through special channels to the required nodes).
- Possibility of installation of the hydrometer (optional, allows you to monitor the humidity of the dried product through a built-in moisture indicator).
- Possibility of installation of heat exchanger (provides for a more gentle drying mode in relation to seed)
Другие объявления пользователя