The semi-mounted reversible plough PON-5‒40+1 designed for plowing soil for grain and industrial crops to a depth of 18 - 35 cm, not blocked with stones, fieldstone and other obstacles with a specific resistance of soil to 0.09 MPa and with hardness of up to 3.5 MPa.(furrow). When creating a plow was set a task to draw the attention of the users of agricultural machines to the outside attractive and convenient to operate the plow. In market conditions before a modern agricultural enterprise is an issue of profitability. Using modern technology successfully addresses this issue. By purchasing a novelty of our production, the semi-mounted reversible plough PON 5-40+1 (PON-7‒40+1), You get: — ease of operation; — excellent quality of plowing; — high performance. Semi-mounted reversible plow consists of a frame together with the mechanism of the coup, housings (right and left), the mechanism of the rear support wheels, drawbar with a tower. — is on the main beam five right and five left cases; — each case is made with a band blade. Piles of plow have a stripe structure, which allows more intensively loosen the earth in conditions of high humidity, leaving no continuous seams. The working body is equipped with screw Adjusters that allow you to adjust the width and angle of the blade (33, 38, 44 and 50 cm for each case). The frame is the basic bearing element and serves for the mounting of the Assembly units. Consists of square-section beams, which are pivotally attached to each other. Both sides of the main beam of the frame pivotally connected to the rotary blade and the carrier beam. The main bar is also equipped with a diagonal emphasis, connecting the main beam and rear pivot beam. The side that is adjacent to the tractor drawbar securely the fixation point (the tower), and on the opposite side — the mechanism of supporting wheels and two wheels, contains 5 double hulls. Design features allow you to have a number of advantages: Maneuverability: when maximum performance is ensured a quick turn on a narrow headland. The ability to easily change the widths of the working of the body (33, 38, 44 and 50 cm for each case). The high strength of the plow — a pledge many years of service of the unit. Plough quality processes edge of the field, and places along ditches and fences. The possibility to transport the plow at high speed without causing the load on the tractor. High wear resistance of working bodies production of "VELES-AGRO" provides cost savings on plowing. Assembly type semi-mounted Width (m) 1.98‒3.0 Width of housing (mm) 330/380/440/500 Treatment depth (cm) 18-35 The number of working parts (PCs) 6 Distance between housings (mm) 1000 Dimensions see below Length (mm) 7050-8050 Width (mm) 1720 Height (mm) 3010 Clearance under the frame (mm) 800 Weight of unit (kg) 2500-2750 Required tractor power (HP) 225-270 The traction class of a tractor 3.0‒4.0 Recommended working speed (km/h) 7 — 10